Frankie Muniz Racingt pull on the large lever. It will probably not fix the jam, and could easily damage irreplaceable parts inside the machine. 2 Open up the b ack of the machine by inserting the key into the keyhole and turning. You will now see the machine's gears exposed at the bottom, the reels in the center, and the bonnet at the top of the machine. The bonnet is a large metal piece covering the escalator, which is the mechanism fo r accepting coins and moving them into the rest of the machine. Most repair problems come from a jam in the escalator. 3 Locate the two clas unity 3d download ps on the side walls of the machine. These should be roughly parallel to the reels. Pull these clasps up to release them. The bonnet may now be removed. On some machines these clasps may not be on the sides, but directly underneath the bonnet. Inspect around the bonnet for any ad Frankie Muniz Racing ditional clasps or clips (models differ) and unhook these as well if they exist. Remove the bonnet by lifting up and pulling out, towards yo . path, gently loosen them with hands or screwdriver. 5 Look above the reels, at the bottom of the escalator. There may be a horizontal bar i n this location. If you can, insert a coin and pull the main lever on the outside of the machine. Look to see if this action affects the sma ll horizontal bar above the reels. This bar is meant to detect whether a coin is in the escalator, and stop the reels from moving if there i s not. On an old machine it could be sticky or stuck. 6 If the bar is sticky, remove it by unscrewing the screws holding it in place, clean number fonts it off, spray with lubrication and screw it back into place. 7 Re-examine the entire escalator mechanism for sticky levers or gears and jamm ed coins. The escalator is different on every model of machine, so just look to see if everything is moving properly. If it is, the problem Frankie Muniz Racing may be elsewhere, and the entire machine will need to be removed from the casing. Remove the Mechanics 8 Locate the two clasps which connect . ll towards yourself (some machines will need to be pulled up first, then out). If the machine does not come out of the casing, look for a bo lt connecting the machine to the base; this is present on some Mills machines. Unscrew this bolt and try pulling the machine towards yoursel f again. 10 Examine the mechanical unit very closely with a flashlight, looking for any caught coins. Look at the very bottom, under the ree ls, everywhere that is visible. Remove the coins with your hands, pliers, or a magnet. 11 Examine all of the wheels, gears, and other mechan share icon ical pieces for sticking. If any are sticking, clean them up with a rag, and spray on some lubricant. If something is stuck, gently push it back and forth with fingers or screwdriver to free up the gears.Board Games Playing a board game Several board games were invented and becam Frankie Muniz Racing e popular in the 1940s. Aside from Scrabble, Candy Land was invented, as was Chutes and Ladders. Candy Land was one of the few board games a .
|