Frankie Muniz Racings of the equipment, singing as you go. Climb the ladder, go down the slide, swing on the bars and try out all of the different parts of the playground together so that the children have a chance to learn how to use it all safely. Following the Leader Anyone who's watched the Disn ey film "Peter Pan" likely remembers the song, "I'm Following the Leader." Rather than having the children trek through the woods, name a le ader among the group and have that child lead the other children around the playground. Keep a close eye on them. If the leader does anythin photoshop backgrounds g that's unsafe, like running on the equipment or trying to jump from a height, stop the game. Tell the children -- or have them tell you -- why they can't do that and pick a new leader. You can also have the children sing the song while they're playing the game if it helps to ke Frankie Muniz Racing ep them engaged. Playground Safety List Create a list together before going to the playground. The key to making children want to follow the . hey start to get stuck, such as: "Can we run up and down the slide?" The rules don't have to be completely serious. For example, one could b e: "Don't dance on the monkey bars."To make the set of rules easier for the children to understand, divide it into two lists: "Can Do" and " Can't Do." Once you've gone over everything, have the children draw a picture of something they can do and of something they can't do on the playground.1 Cut eight 6-inch wires and strip 1/4-inch of insulation from each end. Solder one wire to each of the switch's two solder lugs 3ds models . Solder one wire to each solder lug on the three mini jacks. 2 Insert the transistor's three pins into the protoboard from the component si de so that the pins stick through the board's copper side. Solder one pin to the board to keep the transistor from falling out. 3 Place one Frankie Muniz Racing of the 2.2K-ohm resistor's leads through the board, near the transistor's collector pin. Put its other lead through any convenient hole. Sol . r's unconnected lead. Solder this connection. Insert the anode lead through any convenient hole. Insert one wire from the switch near this h ole. Solder the connection. Insert the switch's other wire through a convenient hole and the battery clip's red wire through an adjacent hol e. Solder these two wires together. 5 Set the negative lead of the 100-microfarad capacitor near the transistor's emitter. Solder the connec tion. Place the positive lead near the connection between the 2.2K-ohm and 120-ohm resistors. Place one lead of the 4.7K-ohm resistor near t LA Weight Loss his connection also. Solder these resistor and capacitor leads together. Insert the free lead of the 4.7K-ohm resistor through any nearby ho le. 6 Insert the negative lead of a 10-microfarad capacitor near the unconnected 4.7K-ohm resistor lead. Solder the connection. Insert the p Frankie Muniz Racing ositive lead through a convenient hole. Insert the positive lead of another 10-microfarad capacitor near this hole. Solder the two positive .
|