Frankie Muniz Racingd the circle without letting go of each other's hands. Players must maneuver the hula hoop over their legs and arms to get it around the cir cle. The first team to complete the circle wins. Mine Field Game Scatter equipment such as balls, mats, Frisbees and hockey sticks on the gy m floor. Pair up the students and have one of each pair wear a blindfold. At the command, "Go," the player without the blindfold, using only his voice, tries to guide his partner across the "mine field." If the blindfolded player touches an item on the floor, he must go back to t cloth texture he starting line. Once a blindfolded player makes it across the mine field, he trades places with his partner.The first pair to have both pl ayers walk through the mine field without touching anything wins. For an easier game, put fewer items on the floor. Tag The classic game of Frankie Muniz Racing tag is still popular with elementary school students. For a small group, select one player to be "it." For larger groups, choose two or thre . re for the motor at the back edge of the base of the kick wheel. The frame should be built to be tall enough to mount the motor alongside th e base of the kick wheel and allow the rotating axle of the motor to line up with the edge of the wheel. Build a square frame out of 2 inch by 4 inch piece of lumber using the hammer and nails. Hammer legs onto the frame that raise it up to the appropriate height. 2 Mount the mot or onto the side of the support structure using the mounting hardware. Mount the motor so that the rotation axle is pointing downward and ma 3d cars tches the height of the edge of the base of the kick wheel. 3 Carve a groove along the edge of the base of the kick wheel by having a helper kick the wheel while you hold a sharp chisel to the edge of the wheel as it rotates. The groove should be wide and deep enough to fit the b Frankie Muniz Racing elt. 4 Slide the belt attachment onto the rotation axle of the motor. Bolt the motor support structure to the frame of the kick wheel using . t to the axle of the motor and slide it into the groove in the belt attachment on the rotation axle. 6 Plug the motor into a power source an d turn it on.1 Place the two dowels with 5/8-inch diameters next to each other. Use the glue gun to glue them together in this position. 2 P ut a 3/4-inch dowel on top of the two glued dowels. Glue it 1 inch from one end of these dowels. 3 Glue the 1/4-inch dowel perpendicular to other dowels. Center it in the 1-inch gap you left when gluing the 3/4-inch dowel into place. 4 Glue a wooden clothes peg at the opposite en Nutrisystem d to the perpendicularly placed dowel. Glue the peg's pincer on top of the dowel only, so that you can still squeeze the pincers of the peg together. 5 Make a handle for the crossbow by gluing two 3/4-inch dowels together, and cut them to 6 inches in length. Attach the handle to Frankie Muniz Racing the crossbow. Glue it to the two 5/8-inch dowels, behind where you left the 1-inch gap. It attaches to the same end as the peg. 6 Stretch th .
|