Frankie Muniz Racinger well. Building A Fire When you go camping, you need a fire to keep warm. Some campers also prefer to cook over an open fire rather than u se a camping stove. Take with you a small ax to split wood. If it rains and the wood you bring or collect gets wet, use the ax to split the wood and expose the dry section to use to start the fire. Carry a butaine lighter and matches as a back up. Keep them in a dry location. Coo king The supplies you bring along for food while camping depend on whether you want to do some home cooking or make it simple. Purchase drie fad diets d bags of food for camping at your local sporting good store. If you plan on doing some home cooking, pack a cooler with the food you will e at while you are away on your trip. Include cookware, charcoal or propane grill, and fuel for the grill. Bring along cooking utensils and pl Frankie Muniz Racing astic cutlery for eating the food that is prepared. Also pack napkins and tablecloths, and, to round it out, include trash bags to clean up . tion that provides them. Also pack toilet paper. Protect yourself from the sun, even during seasons other than the summer, with sunscreen, a nd bring along bug spray to keep those pests away.1 Flip all of the cards over so that the picture sides of the cards are face down. Arrange the cards into a rectangular grid. Keep the grid as uniform as possible, in order to prevent giving unintentional clues to players, which w ould make it easier to memorize the locations of certain cards. 2 Have the youngest player take the first turn. The player turns over any tw house model o cards in the grid, flipping them all the way over and laying them down with the pictures facing up. The player collects the two cards if t he pictures on them are the same, otherwise the two cards are turned back over and it is the next player's turn. A player that makes a match Frankie Muniz Racing takes another turn, and continues to take turns until they fail to make a match. 3 Have the next oldest player take his turn in the same ma . ute to cool. Wrap them with a few turns of electrical tape. 2 Locate the bridge rectifier near the perfboard's left edge and slip its leads through the perfboard, so they protrude through to the copper-foil back side. Note that two leads are marked with the tilde (~) symbol signi fying alternating current (AC). Two leads have a plus (+) and minus (-) sign. Solder the transformer's two secondary wires to the "~" leads. Trim the lead excess with the diagonal cutters. 3 Insert the 4700-microfarad capacitor's positive lead near the bridge rectifier's positive futura font lead and its negative lead near the rectifier's negative. Solder this connection and trim as before. Place the 220-nanofarad capacitor next to the larger capacitor and solder its leads to the larger capacitors. 4 Seat the L200 IC to the right of the capacitors. Insert its leads Frankie Muniz Racing through the perfboard. Solder pin 1 to the board to hold the IC in. Place the LM741 IC to the right of the L200 and insert its leads through .
|