Frankie Muniz Racinggood way of verifying how well a pit bike has been cared for, aside from a nice, long test drive, is to see the seller's garage. A well-mai ntained garage will often trickle down to a well-maintained bike.Indoor Games Colonial children often had to entertain themselves during the cold winter when they could not go outdoors. Cat's Cradle was a game played with a loop of string twisted around a child's fingers. A secon d child attempted to put his finger through the holes in the string without getting caught when the first child pulled the string tight. Chi Rice Diet ldren played board games such as chess, checkers and Nine Men's Morrice, a game in which the object was to line up three markers in a row on the game board. Another indoor activity was listening to adults tell stories, folk tales and local legends. Outdoor Games Most children, pa Frankie Muniz Racing rticularly boys, spent their free time outdoors. Play was often unsupervised, and rural children often played with their siblings if there w . eenth century, toys were typically homemade, because they were not sold commercially in stores. (See Reference 2, section 2) Children played jacks by tossing a stone up in the air and collecting seeds or pebbles from the ground before the stone landed. Tops were carved from wood, and dolls were made from dried apples and corn husks. The popular ball-and-cup game was carved from wood and involved a ball tied to a wood en-handled cup with a string. The object was to toss the ball in the air and catch it in the narrow cup. A buzz saw, or whirligig, could be Slim-Fast made by threading a button on a piece of string. A child held the ends of the string in her hands and twisted the string tight. When the chi ld pulled her hands apart, the button whirled around on the string, making a buzzing noise.1 Locate and set the break on the motor. The brak Frankie Muniz Racing e is usually located on top of the motor and consists of a metal bar. To lock the motor, pull the metal bar in a clockwise motion with your . Pull the cutter out of the cullet with your fingers. Be careful, as the cutter is sharp. 4 Turn the nut counterclockwise with you hand unti l you completely unthread it from the drill head. The cullet will come out with the nut when you lower the nut from the drill head. This com pletes the disassembly of the drill head.1 Sand the hub on the prototype propeller so that it gently tapers away from the center line of the propeller. This will help to make sure the propeller does not stick in the mold. Apply wax to the entire propeller. Cut a rectangular piece Sonoma Diet of plastic laminate or aluminum to form the base of the mold box. It should be slightly wider and longer than the prop that will be molded. Cut two rectangular pieces of plastic laminate or aluminum to form the sides of the mold box. These pieces should be slightly wider, longer Frankie Muniz Racing and taller than the propeller that will be molded. Cut two identical pieces of plastic laminate or aluminum to form the ends of the mold bo .
|